| GARLOCK 032DXR024 Sleeve Bearings | Mass pillow block:172 kg; Initial grease fill:1672.65 g; Taconite seal:TER 155; Stabilizing ring:SR-38-32; A1:190.5 mm; H1:200.025 mm; L:711.2 mm; Cap bolt recommended tightening torque:271.2 N·m; RG:1 NPT; P120°:107 kN; |
| GARLOCK MB1208DU Sleeve Bearings | J min.:336.55 mm; H1:133.35 mm; Mass pillow block:60.3 kg; Cap bolt, SAE grade:8; P90°:149 kN; H:257.175 mm; Adapter sleeve assembly:SNW 3028x4.7/8; Eye bolt:2 x 3/8-16 UNC; Bearing:23028 CCK/W33; J1:69.85 mm; |
| GARLOCK GM3034-020 Sleeve Bearings | P180°:92.5 kN; R1:115.888 mm; P150°:77 kN; A1:171.45 mm; End plug (suffix Y):EPR 19; L:628.65 mm; Initial grease fill:878.85 g; P60°:234 kN; S:4.763 mm; P90°:140 kN; |
| GARLOCK G11DU Sleeve Bearings | ba max.:146 mm; A:320 mm; P120°:1700 kN; Lock nut:HM 48 T; Labyrinth seal:2 x TS 60/260; Initial grease fill, 40%:3.8 kg; Cap bolt, rec. tightening torque:400 N·m; L:770 mm; J:650 mm; bb:117 mm; |
| GARLOCK 048 DU 040 Sleeve Bearings | Mass angle ring:1.5 kg; d1 ≈:153.5 mm; B2:27 mm; r3,4 min.:4 mm; d:100 mm; B1:16 mm; |
| GARLOCK MB220100DU Sleeve Bearings | d1:203.2 mm; d:220 mm; B1:149.631 mm; d3 max.:260.477 mm; B4:34.925 mm; B:32.004 mm; Lock nut:N 044; Sleeve:S 44x8; Mass adapter sleeve assembly:13 kg; Hydraulic nut:HMVC 44E; |
| GARLOCK 076 DU 064 Sleeve Bearings | Recommended diameter for attachment bolts, mm G:12 mm; Basic static load rating C0:15.3 kN; R1:24 mm; d:36.512 mm; B:42.9 mm; N:14.3 mm; Housing:FYTWR 507 Y; Mass bearing unit:1.3 kg; Thread grub screw G2:5/16-24 UNF; L:92.1 mm; |
| GARLOCK 12 DU 12 Sleeve Bearings | B:27.762 mm; d:31.75 mm; Da max.:47 mm; da max.:36.2 mm; Design (sliding contact surface combination):Steel/steel; Sealing solution:Triple-lip seals; Specific static load factor K0:300 N/mm²; Da min.:44.8 mm; b:4.8 mm; dk:45.593 mm; |
| GARLOCK 16FDU16 Sleeve Bearings | Basic Dynamic Radial Load Rating C:78100 N; Sealed Speed Rating n3:4300 rpm; d:60.000 mm; Accessories:One Seal; Basic Static Radial Load Rating Co:88000 N; B:38.10 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:5000 rpm; Grease Speed Rating n1:3800 rpm; D:110.0000 mm; |
| GARLOCK GM5260-040 Sleeve Bearings | Basic dynamic load rating C:30 kN; Da min.:30.9 mm; Specific dynamic load factor K:100 N/mm²; Sealing solution:Triple-lip seals; Design (sliding contact surface combination):Steel/steel, heavy-d; Material constant KM:330; α:6 °; da min.:23 mm; Lubricant:Regular relubricatio; Mass plain bearing:0.073 kg; |