| GARLOCK GM4852-048 Sleeve Bearings | Oil:3 800 min-1; rs Dynamic (Cr):2 mm; Static (Cor):58.610 kN; D:160 mm; Pu:23.300 kN; B1:mm; Grease:0.940 kN; with tapered bore:1218 ; B:30 mm; with cylindrical bore:4 500 min-1; |
| GARLOCK GF2630-020 Sleeve Bearings | r3,4 min.:2.5 mm; d1 ≈:136.48 mm; Basic static load rating C0:440 kN; rb max.:2.5 mm; Calculation factor e:0.43; Da max.:168.5 mm; db min.:113.5 mm; Fatigue load limit Pu:48 kN; r1,2 min.:3 mm; Basic dynamic load rating C:390 kN; |
| GARLOCK GF5664-064 Sleeve Bearings | D:135 mm; Mass housing washer:0.35 kg; r1,2 min.:1 mm; D1:102 mm; B:7 mm; |
| GARLOCK GF2832-024 Sleeve Bearings | D:190.0000 mm; Sealed Speed Rating n3:2200 rpm; Basic Static Radial Load Rating Co:104000 N; B:36.00 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius ra:2.00 mm; d:105.000 mm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:3800 rpm; Oil Speed Rating n2:3800 rpm; |
| GARLOCK 20 DU 14 Sleeve Bearings | Mass bearing:300 kg; α:20 °; Basic dynamic load rating C:6050 kN; b:13.9 mm; C:380 mm; D1 ≈:492.5 mm; B:400 mm; Fatigue load limit Pu:1200 kN; r1,2 min.:14 mm; Basic static load rating C0:14000 kN; |
| GARLOCK GM3240-048 Sleeve Bearings | Hydraulic nut:HMV 13 E; Lock nut:KMFE 13; d3:85 mm; d:65 mm; B:15 mm; G:M 65x2; B1:50 mm; d1:60 mm; Mass adapter sleeve assembly:0.43 kg; |
| GARLOCK 032DXR016 Sleeve Bearings | Basic Dynamic Radial Load Rating C:72800 N; B:39.70 mm; d:45.000 mm; Accessories:One Shield & Snap-Ri; Fillet Radius ra:1.50 mm; D:100.0000 mm; Sealed Speed Rating n3:4500 rpm; Grease Speed Rating n1:4500 rpm; Basic Static Radial Load Rating Co:53000 N; Oil Speed Rating n2:6000 rpm; |
| GARLOCK FM050055-040 Sleeve Bearings | d1 ≈:219.2 mm; d:170 mm; B1:12 mm; Mass angle ring:1.8 kg; B2:24 mm; r3,4 min.:4 mm; |
| GARLOCK MB1225DU Sleeve Bearings | Da:269.999 mm; N1:28.575 mm; P180°:96.1 kN; H1:160.325 mm; P120°:87.2 kN; Pa:32.7 kN; J max.:463.55 mm; Housing:SAF 530; Initial grease fill:623.7 g; Appropriate attachment bolt size G:1 in; |
| GARLOCK 032DXR024 Sleeve Bearings | Mass pillow block:172 kg; Initial grease fill:1672.65 g; Taconite seal:TER 155; Stabilizing ring:SR-38-32; A1:190.5 mm; H1:200.025 mm; L:711.2 mm; Cap bolt recommended tightening torque:271.2 N·m; RG:1 NPT; P120°:107 kN; |