| BOSTON GEAR M1013-12 Sleeve Bearings | Weight:1.27 kg; C:25 mm; G:3/8-24UNF; T max.:200 °C; Recommended tightening torque for set screw:16.8 Nm; C1:7.2 mm; D:100 mm; T min.:-20 °C; C0:29.2 kN; d:50.8 mm; |
| BOSTON GEAR CB-2440 Plain Bearings | B1:128.6 mm; B:100 mm; A1:40 mm; Weight:27.75 kg; Recommended tightening torque for set screw:65.2 Nm; G:M10x1; N:44mm; H:440 mm; L:270 mm; A2:137.6 mm; |
| BOSTON GEAR 1628DC Single Row Ball Bearings | Radial clearance class:CM; Characteristic outer ring frequency, BPF0:4.1 Hz; Characteristic inner ring frequency, BPFI:5.9 Hz; Nlim (grease):3,400 rpm; Da max:117 mm; Mass:1.07 kg; d:70 mm; Min operating temperature, Tmin:-25 °C; Static load, C0:44 kN; B:24 mm; |
| BOSTON GEAR LS-19 Plain Bearings | Recommended tightening torque for set screw:5.5 Nm; L:140 mm; S:7.5 mm; Designation of housing:P205N-; Designation of bearing:US205G2T04; H2:70 mm; Designation of open end cover:SCO205-25; Weight:0.8 kg; s1:13.5 mm; A:38 mm; |
| BOSTON GEAR B1220-16 Sleeve Bearings | N1:24.5 mm; G:M6x1; S:15.9 mm; B:38.1 mm; Designation of housing:PLE206-; C0:11.2 kN; L:161.5 mm; H2:79.5 mm; H:39.7 mm; J:119 mm; |
| BOSTON GEAR M2834-22 Sleeve Bearings | A2:42.2 mm; J:82.5 mm; G:R1/8"; B:38.1 mm; Weight:1.12 kg; T max.:200 °C; C0:11.2 kN; A:33.5 mm; Z:29.5 mm; Designation of bearing:UC206G2T20; |
| BOSTON GEAR B1012-10 Sleeve Bearings | S:14.3 mm; L:68 mm; Designation of bearing:UC205-14G2L3; J1:51 mm; Designation of closed end cover:SCC205; A:27 mm; Z:39.6 mm; s1:17 mm; C0:7.88 kN; B:34 mm; |
| BOSTON GEAR M1216-16 Sleeve Bearings | Da max:264 mm; d:130 mm; Brand:NTN; Fatigue limit load, Cu:65.4 kN; D:280 mm; r1s min:4 mm; Category:Bearings; Db min:246 mm; Product Group:B04144; ra max:3 mm; |
| BOSTON GEAR B2026-16 Sleeve Bearings | S:25.4 mm; Designation of bearing:UC212-38G2L3; SW:4.76 mm; s1:32.55 mm; B:65.1 mm; C:52.5 kN; C0:32.8 kN; T min.:-20 °C; T max.:100 °C; d:60.32 mm; |
| BOSTON GEAR M2030-20 Sleeve Bearings | L:241 mm; Weight:4.93 kg; T max.:100 °C; C0:32.8 kN; B:65.1 mm; H:69.8 mm; L1:70 mm; N1:25 mm; Recommended tightening torque for set screw:22 Nm; J:184 mm; |