| BOSTON GEAR M1822-32 Sleeve Bearings | Bearing Family:Setscrew Ball Bearin; d:25.0000 mm; Retainer Material:Nylon; Bearing Locking Device:Setscrew; Grease Type:Unirex N2; Expansion Type:Non-Expansion; Housing Type:2 Bolt Pillow Block; Ring Size:Standard; Bearing Insert Material:Steel; Seal Type:Single Lip; |
| BOSTON GEAR B1220-6 Sleeve Bearings | S:17.5 mm; C:20 mm; Recommended tightening torque for set screw:8.3 Nm; Weight:0.47 kg; T max.:100 °C; d:35 mm; SW:4 mm; G:M8x1; D:72 mm; r:1; |
| BOSTON GEAR FB-1216-12 Sleeve Bearings | G:M6x1; N:19mm; J:130 mm; Recommended tightening torque for set screw:16.8 Nm; S:22.2 mm; T max.:100 °C; A:43 mm; Z:37.7 mm; Designation of housing:F211N-; e:25 mm; |
| BOSTON GEAR 7520-DL Single Row Ball Bearings | L:94 mm; G:M6x1; A:48 mm; L1:30 mm; E:18 mm; J:66 mm; Designation of bearing:ES206-20G2; Designation of housing:PA206-; H1:13 mm; d:31.75 mm; |
| BOSTON GEAR M3442-40 Sleeve Bearings | N1:21 mm; L:165 mm; Designation of housing:PH206N-; T min.:-20 °C; Dz:70 mm; Recommended tightening torque for set screw:3.7 Nm; S:15.9 mm; L1:56 mm; G:M6x1; H2:130 mm; |
| BOSTON GEAR M911-12 Sleeve Bearings | Characteristic cage frequency, FTF:0.43 Hz; Fatigue limit load, Cu:11.9 kN; B:25.4 mm; a:16.41 mm; C:19.05 mm; d:41.28 mm; ra max:3.5 mm; Y0:1.04; Brand:NTN; Y2:1.88; |
| BOSTON GEAR M88048 CONE Roller Bearings | d1:100 mm; Characteristic inner ring frequency, BPFI:11.27 Hz; C:26.99 mm; D:127 mm; e:0.5; Characteristic rolling element frequency, BSF:7.34 Hz; Y2:1.2; Dynamic load, C:163 kN; Rating life coefficient, A2:1.4; r1a max:3.3 mm; |
| BOSTON GEAR M2432-32 Sleeve Bearings | G1:M24; B1:51.1 mm; L3:40 mm; Designation of housing:EHE207-; Designation of bearing:EX207G2L3; C:25.7 kN; A2:40 mm; Weight:1.3 kg; T max.:100 °C; G:R1/8"; |
| BOSTON GEAR M1013-12 Sleeve Bearings | Weight:1.27 kg; C:25 mm; G:3/8-24UNF; T max.:200 °C; Recommended tightening torque for set screw:16.8 Nm; C1:7.2 mm; D:100 mm; T min.:-20 °C; C0:29.2 kN; d:50.8 mm; |
| BOSTON GEAR CB-2036 Plain Bearings | A:48 mm; G:M6x1; T max.:100 °C; L:175 mm; Z:73.2 mm; Recommended tightening torque for set screw:16.8 Nm; Designation of housing:F212N-; C:52.5 kN; Dz:120 mm; A2:68.7 mm; |